Universal

  • Compact heavy duty, non-metallic magnetic drive pump.
  • Universal flange design meets ANSI, ISO and JIS piping connections.
  • Universal connections to a NEMA or IEC Frame Motor, Close Coupled.
  • Universal chemical resistance using a thick layer of mechanically tough, chemically inert ETFE or PFA fluoropolymer.

Double Welded Impeller

  • The inner magnets are protected by a patented hermetically sealed cover.
  • For an extreme corrosion and permeation resistant barrier the magnet assembly is again hermetically sealed with a corrosion resistant fluoropolymer ETFE or PFA creating a double weld design. 

Solids Handling

  • Innovative particulate control ring protects bearings against solids damage.

Open Suction

  • A cantilever shaft located in the containment shell eliminates the need for a shaft support in the pumps suction.
  • No suction blockage, Lower NPSHr.

Water Hammer Resistant

  • The U-mag pump has a 10 x safety factor for maximum resistance to sudden system surges.

Modified Concentric Volute

  • All Innomag casings are designed to minimize radial loads and distribute pressure evenly across the entire flow range.
  • Lowers stress on bearings for maximum pump life.

Sealless

  • Non-slip, synchronous mag-drive pump.
  • Leak free operation for a clean environment.
  • Process lubricated, no external flush system needed.

Trouble-free Maintenance

  • A back pull out design for quick in the field inspections or maintenance without disturbing the piping connections.
  • Liquid end and drive end independently serviceable.
  • Complete kits are available for impellers, containment shells and casings. No assembly.

Armored Design

  • Ductile iron, the suit of armor protecting the pump from pipe strain, vibration, exterior shocks and handling.

External Protection

  • All mating and exposed metal surfaces are coated in a premium Epoxy/Epoxy Polyamide Primer and topped with an aliphatic acrylic polyurethane.

Performance

  • Temperature range of  -20oF (-29oC) to 250oF (121oC)
  • Capacities up to 450 gpm (102 m3/hr)
  • Heads up to 165 ft (50 m)
  • Pressures up to 300 psi (2068 kPa)
  • Power ranges are 1 to 14 hp ( 0.75 to 10.5 kW)

The TB-Mag series

 

The U-Mag Series

Innomag Solutions