• One-piece ductile iron casting.

• Mounts to a wide range of standard NEMA & IEC C-face motors.

• Includes (3) ½” NPT access ports for optional monitoring.

• Zero alignment required.

• Universal foot supports entire pump load.

• One outer drive per motor frame size.
• Dowel pins eliminates motor shaft key for quick and easy install.
• Center “drill & tap” thread for easy removal from motor shaft.

• Extra-heavy duty, one piece ductile iron casting.
• Separate from the adapter to allow servicing of the motor without opening the liquid end of the pump.
• Precisely aligns and supports the containment shell in the casing.
• Precisely aligns motor adapter to pump end.

• Particulate control ring helps to protect radial bearing and containment shell from solids.
• Reinforced socket for pump shaft.
• Outer pressure housing made of Aramid composite for high pressure, strength & shock resistance.

O-Ring Gasket

• Replaceable, FEP / FKM o-ring standard.  Provides universal chemical resistance.
• Square cross section: 0.210 x 0.210,  more sealing surface that traditional O-rings.
• Optional Materials are FKM (Fluorocarbon) or EPDM.  Others available upon request.
• Positioned between the Casing and Containment Shell.

Bearing

• Simple, reliable single bearing system made of carbon graphite or pure sintered silicon carbide (SiC).

• Molded one-piece enclosed impeller made of carbon fiber-reinforced ETFE or PFA.
• High strength neodymium iron boron magnet assembly.
• Magnet assembly hermetically sealed by Patented “Tru-Seal” Design.
• High efficiency, low NPSHr impeller geometry.

• One piece cast ductile iron.
• Flanges are slotted as standard, fits ANSI, ISO and JIS connections(other options available)
• Bonded ETFE or PFA lining, minimum of 1/8” (3mm) thickness.
• Optional two bolt flanged ½” drain with pure PTFE gasket and 316SS blind flange